Dyson Sphere Program Interplanetary Logistics Guide
Set up Dyson Sphere Program interplanetary logistics with one titanium route, clear supply and demand settings, and fixes for stalled deliveries.

If you have reached another planet but every titanium shortage still sends you back into space, build one same-system titanium-ingot route before expanding further. Your first Dyson Sphere Program interplanetary logistics setup should replace that recurring cargo run, not connect every resource on every planet.
The minimum working chain: off-world miners feed smelters, smelters load an exporting station, logistics vessels carry the ingots home, and a receiving station feeds a consumer. Manual hauling gets you the equipment to build that chain. Automation takes over only after the whole chain works.
1. Stop hauling one resource first
Use this walkthrough if you can already travel between planets and have found an off-world titanium source. If leaving home or preparing a safe first trip is still the blocker, return to the first off-world trip guide.
The worked route has a deliberately narrow scope:
- Cargo: titanium ingots, smelted on the resource planet.
- Origin: an Interstellar Logistics Station beside the off-world production line.
- Destination: another Interstellar Logistics Station at your home factory.
- Transport: logistics vessels stationed at home.
- Consumer: a titanium crystal production line, supplied separately with organic crystals.
- Distance: between planets in the same star system, without space warpers.
The building is called an Interstellar Logistics Station even when you use it between planets around the same star.
Planetary logistics drones cannot substitute here. Drones move cargo between stations on one planet; vessels handle transport between planets.
2. What must still be hauled manually?
The bootstrap problem is real: the infrastructure that automates titanium deliveries depends on titanium-derived materials.
Plan on manually returning enough titanium ingots to push through research and manufacture the route equipment. One exploratory load is not necessarily enough for both jobs.
Follow the dependency chain, not just the station unlock
The relevant progression runs through these dependencies:
- Titanium processing: make titanium ingots from off-world ore.
- Structure matrices: titanium crystals and diamonds support the yellow research stage needed for interstellar logistics.
- Planetary logistics infrastructure: a Planetary Logistics Station is an ingredient in the larger station.
- Interstellar Logistics System research: unlocks the Interstellar Logistics Station and logistics vessel.
- Station manufacture: prepare Planetary Logistics Stations, titanium alloy, and particle containers.
- Vessel manufacture: prepare titanium alloy, processors, and reinforced thrusters.
Titanium alloy also requires steel and sulfuric acid. Importing titanium does not remove those manufacturing dependencies, so budget your bootstrap cargo against the full chain rather than the station alone.
Pack a complete endpoint
For the off-world construction trip, bring:
- An Interstellar Logistics Station.
- Miners and smelters, unless production already exists.
- Belts and sorters for extraction and smelting.
- Power generation, fuel where applicable, and grid connections.
- Enough construction materials to connect production to the station.
- Mecha fuel for the trip and construction work.
Leave the receiving station and logistics vessels at home if you are building that endpoint first. Vessels belong in a station’s vessel inventory, not just your personal inventory.
If producing these components still requires rebuilding your basic factory, use the Dyson Sphere Program beginner guide first. If both stations already exist and nothing moves, skip to troubleshooting below.
3. Build the export endpoint: ore must become station stock
On the titanium planet, establish this physical flow:
Titanium ore → smelters → titanium ingot belt → exporting station
Smelting at the source keeps the route focused on the material your home factory needs. Do not configure the station for titanium ore while feeding it ingots.
Start with production you can keep powered. A modest working line beats a large installation that keeps browning out.
Prove production before configuring transport
Watch each handoff:
- Miners produce titanium ore.
- Ore reaches the smelters.
- Smelters receive power and output ingots.
- The ingot belt reaches a station port.
- The station’s titanium-ingot inventory increases.
Stations accept belts directly through their ports; no sorter goes between a belt and the station. Sorters still matter around the smelters.
Assign titanium ingots to a cargo slot. Set that slot to Remote Supply and Local Storage.
Remote Supply makes this stock available to other planets. Local Storage keeps it out of local drone supply-and-demand exchanges. It does not disable the belt connection.
The export station can be passive
In this configuration the exporter holds no vessels and does not need station power to serve as a pickup endpoint. Belt loading still fills its cargo inventory.
That exception covers the station, not the outpost. Miners, smelters, and other production equipment still need a working grid. You can power the exporter, but there is little reason to add a station-charging load to a small outpost grid.
4. Build the receiving endpoint and connect its consumer
Place the home station where an output belt can reach your titanium crystal assemblers without crossing half the starter base.
Assign titanium ingots to a cargo slot, set it to Remote Demand and Local Storage, and connect the station to the home grid.
Then draw a belt outward from a station port and select titanium ingots as that port’s output cargo. Assigning an item to station storage does not, by itself, send it down every outgoing belt.
| Setting | Titanium exporter | Home receiver |
|---|---|---|
| Cargo slot | Titanium ingots | Titanium ingots |
| Remote mode | Remote Supply | Remote Demand |
| Local mode | Local Storage | Local Storage |
| Vessels | None required | Load logistics vessels |
| Station power | Not required for passive pickup | Required for dispatch |
| Belt direction | Ingots into station | Ingots out to consumer |
Set a nonzero storage limit for titanium ingots at both ends. The exporter needs room to accumulate cargo; the receiver needs room to accept it.
Connect the home output to your titanium crystal line. Those assemblers also need organic crystals and power. If either is missing, titanium backs up even when transport works perfectly.
Keep two questions separate:
- Did the shipment arrive? Watch the receiving station’s inventory.
- Can the factory use it? Watch the output belt and assemblers.
Do not rebuild the transport route to fix an assembler waiting on its other ingredient.
5. Commission the route from the home station
Load logistics vessels into the home station and let it charge.
Only the home station needs vessels. A home-based vessel flies to the exporter, collects ingots, and returns, drawing transport energy from its owning station. That is why an unpowered exporter works here and an unpowered home dispatch station does not.
Charge without starving the factory
A station’s charging setting controls how quickly it draws power to refill its energy buffer. It does not create generation capacity.
Compare available generation with the combined demand from production and charging. If charging pushes demand past supply, the rest of the factory slows down, including the machinery supporting your new route.
Start with a charging load your grid can carry. Raise it only if slow energy recovery is delaying repeat trips and generation has headroom.
A station connected to power is not necessarily ready to launch. Check that its stored energy is actually rising.
Check the dispatch conditions
For the first shipment:
- Keep the vessel transport range wide enough to include the resource planet.
- Do not require warpers for this same-system route.
- Make sure the exporter holds enough ingots to satisfy the vessel’s minimum-load setting.
- Make sure the receiver has free capacity for an eligible shipment.
While production is still filling the first batch, a high minimum-load setting can make a correct route look broken. Either let stock accumulate or temporarily lower the vessel minimum load. Smaller dispatches prove the connection sooner but mean more trips for the same cargo, so treat the change as commissioning help, not a long-term improvement.
Follow the first shipment
Watch the route in order:
- Export inventory accumulates.
- The home station charges.
- A vessel leaves the home station.
- The vessel collects cargo from the exporting station.
- Titanium arrives in home storage.
- Ingots leave through the selected output port.
- The consumer uses them.
If ingots flow straight into production, the home inventory may rise only briefly. Watch the belt as well as the counter.
6. Why is nothing arriving?
When Dyson Sphere Program logistics vessels are not working, find the earliest broken handoff. Changing settings on both stations at once makes the cause harder to isolate.
| Symptom | Check in order | Concrete fix |
|---|---|---|
| Export inventory stays empty | Mining → smelting → belt direction → cargo slot | Restore production or feed ingots into the correct station slot |
| Home station never launches | Vessel inventory → stored energy → demand mode | Load vessels, let the station charge, set Remote Demand |
| Charging barely progresses | Grid connection → generation → total demand | Restore power; reduce charging load or add generation |
| Both stations hold the right item, but no trip starts | Export remote mode → home remote mode → local/remote confusion | Use Remote Supply off-world and Remote Demand at home |
| Small export stock sits untouched | Vessel minimum load → available ingots | Accumulate a qualifying load or lower the minimum temporarily |
| Loaded exporter is ignored | Vessel range → warper requirement → endpoint settings | Allow the destination distance and remove an unnecessary warper requirement |
| Deliveries stop with home storage full | Free capacity → output belt → consumer | Restore consumption; increase storage only if more buffer is needed |
| Home inventory rises but output stays empty | Belt direction → port cargo selection | Draw the belt outward and select titanium ingots |
| Output belt fills and stops | Assembler power → organic crystals → product output | Repair the blocked consumer rather than changing logistics |
| First trip works, then a long pause | Export refill → home energy → destination room | Fix the limiting stage before adding vessels |
A vessel waiting at home is not automatically a fault. If demand is satisfied or no eligible shipment exists, waiting is correct behavior.
More vessels cannot fix an empty exporter either. They add transport capacity; they do not produce titanium.
7. Prove replenishment while the factory consumes titanium
One successful delivery proves the endpoints can exchange cargo. It does not prove the route can keep up.
Run the titanium crystal line normally and observe further delivery cycles without carrying replacement ingots yourself:
- Let the consumer draw down home stock. Keep its other ingredients supplied.
- Watch the exporter refill after pickup. A large initial stockpile can hide inadequate production.
- Watch station energy recover. The home station must support later departures, not just the first.
- Observe another completed delivery. Confirm stock replenishes while production runs.
- Check the home inventory trend. Repeated deliveries alongside a steadily shrinking buffer mean a supply shortfall.
Inventories will not be flat; batch transport produces rises and falls. “Good enough” means the consumer stays fed across repeated cycles, export production rebuilds stock, and charging does not destabilize either factory.
If home stock keeps falling, locate the constraint. An exporter that never accumulates ingots needs more smelting. An exporter sitting full while home runs dry points to dispatch frequency, charging, or vessel capacity.
Is this route ready to expand?
8. What can wait until this route works?
You do not need local drone distribution, vessels at both endpoints, maximum storage, or a network-wide station plan to automate this delivery.
Interstellar expansion can wait too. Space warpers matter for longer-distance transport between star systems; they are not a prerequisite for this same-system titanium route.
Defer advanced range restrictions, fine-grained shipment tuning, and large fleets until an observed bottleneck justifies them. Extra settings are not progress if you can no longer explain why a vessel should launch.
Once the checklist above holds, add the next resource that repeatedly interrupts construction, not every resource you might eventually need.
The milestone for Dyson Sphere Program interplanetary logistics is not owning two stations. It is being able to build something else while titanium keeps arriving.


